Radiometric Measuring Devices from EIT

Compact Sensor

• Improved optical design to virtually eliminate solarization
• Small profile for installation in tight spaces
• Squared body design for easier mounting
• Can be used on most lamp makes and types
• Sealed optics to prevent contamination - optional air purge
• Available with a "lamp on" detector
• Compatible with any of EIT¹s monitoring equipment

DIN Rail UV Intensity Monitor

• Continuously monitors the output of a single UV lamp as a percentage of 100% original value
• Clamps onto "din rail" behind equipment allowing multiple units to be inserted into a relatively compact area
• Provides a 0-10 volts output proportional to UV which can interface to a PLC, strip chart recorder, etc.
• Features an alarm relay contact
• Powered by 24 volts AC or DC

Microcure

• Microprocessor-based, battery-powered miniature UV radiometer
• Small Size: 1.3"L x 1.0"W x 0.25"T (33.0mm x 25.4mm x 6.4mm)
• Designed to measure UV dose in web printing, container curing, any tight access UV curing application
• Fast sample rate - 2000 per second

Multibrite

• Continuously monitors up to four UV lamps simultaneously
• Provides a readout in percentage of 100% original UV lamp output
• Incorporates a 0-10V output and 4-20mA current output proportional to UV
• Sounds an alarm when any lamp falls below a user settable low limit threshold
• Powered by 110V or 220V

Online UV Intensity Display Module

• Continuously monitors the output of a single UV lamp
• Displays results as a percentage of 100% original value
• Provides a 0-10 volt output proportional to UV which can interface to a PLC, strip chart recorder, etc.
• Provides an alarm relay contact
• Powered by 24 volts AC or DC

Online UV Intensity Display Module

• Continuously monitors the output of a single UV lamp
• Displays results as a percentage of 100% original value
• Provides a 0-10 volt output proportional to UV which can interface to a PLC, strip chart recorder, etc.
• Provides an alarm relay contact
• Powered by 24 volts AC or DC

Palm Probe

• Measure UV system performance particularly in applications where measurement space is limited or it is difficult to establish.
• Establish, document and maintain UV process windows.
• Measures UV irradiance up to 10 Watts/cm2
• Wide dynamic range (100,000:1) allows multiple uses from production curing (high irradiance) to stray hazard (low irradiance) applications.
• Single hand operation.
• Meet ISO, quality and customer requirements for SPC/SQC.

Spotcure

• Monitors the output of a UV "spot curing" system
• Provides indication of light guide degradation and spot curing system degradation
• Standard range version measures UV irradiance up to 19.99 Watts/cm2
• Extended range version measures UV irradiance up to 99.9 Watts/cm2
• Includes several different size light guide adaptors for maximum flexibility

UV Power Puck

• Used in curing applications of inks, adhesives, soldermasks, and epoxies (not for use in web press applications)
• Incorporates four separate spectral response ranges and measures all four simultaneously
• Display scrolls through UV energy density in Joules/cm2 and peak UV irradiance in Watts/cm2 of all four separate UV spectral response ranges
• Measures UV lamp performance (and possible bandwidth shift for doped lamps)
• Compares the efficiencies of different UV curing systems

UV Powermap and UV Map Plus

• UV PowerMAP measures peak irradiance and total energy density in four spectral regions: UVA, UVB, UVC, and UVV
• UV MAP Plus measures the peak irradiance and total energy density for any one channel
• Collection and storage of up to 1 million data points for accurate UV and temperature mapping in your system
• Collected data displayed in graphical and tabular forms in the PowerView software package
• Ultra-fast, user-adjustable sampling rate - up to 2048 samples/second - ensures high resolution even at high speeds

UVI Cure Plus

• Used in curing applications of inks, adhesives, soldermasks, and epoxies (not for use in web press applications)
• Incorporates one UV spectral response range
• Display provides readout of total UV energy density in Joules/cm2 and peak UV irradiance in Watts/cm2
• Measures UV lamp performance
• Compares the efficiencies of different UV curing systems

UVIRAD

• Used in plate exposure or "burning-in" of screens
• Incorporates one UV spectral response range
• Displays readout of total UV energy density in milliJoules/cm2
• Provides convenient way to measure the total UV energy striking a workpiece
• Identifies "cold" and "hot" spots to enhance even exposure
• Rounded edges allows placement under the vacuum frame